Need help?Do you have a question about the Kenwood TK-3230DX and is the answer not in the manual?
General| Purpose | - |
|---|---|
| Maximum range | - m |
| Operating frequency | - MHz |
| Battery life (max) | 18 h |
| Battery low indication | Yes |
| Product color | Black |
| International Protection (IP) code | IP52 |
| Display type | LCD |
Weight and Dimensions| Depth | 29.6 mm |
|---|---|
| Width | 52 mm |
| Height | 103.5 mm |
| Weight | 155 g |
Lists key attributes like design, tone settings, privacy, power saving, and locks.
Details performance ranges in various environments like open locations and buildings.
Alerts users about radio frequency energy and potential interference from modifications.
States compliance with FCC Part 15 for Class B devices and measures for interference reduction.
Advises on handling, charging, and avoiding damage to the transceiver and battery.
Lists hazardous locations and conditions where transceiver use is prohibited or restricted.
Instructions for unpacking and checking for missing or damaged items.
Lists the items included in the transceiver package.
Covers initial setup steps before operating the transceiver.
Step-by-step guide for attaching and detaching the battery pack.
Instructions for attaching the belt clip to the transceiver.
Guide for connecting external audio accessories like speakers or microphones.
Steps to turn the transceiver on/off and adjust the audio volume level.
How to navigate and select different operating channels on the transceiver.
Procedures for initiating a voice transmission on the selected channel.
Explains functions to filter unwanted calls using tones or codes.
Enables private conversations by encrypting voice messages.
How to change transmit power between high and low settings for range or battery life.
Improves audio clarity by compressing and expanding signals.
Opens the squelch to listen for activity on the current channel.
Prevents accidental changes to settings by locking the keys.
Disables key functions and Setting Mode for enhanced security.
Specifies the channel to return to after scanning or transmitting.
Sets the sensitivity threshold for receiving signals.
How to use VOX for hands-free transmission via a headset.
Adjusts voice sensitivity for triggering transmission.
Sets the pause duration before switching from transmit to receive.
Prevents transmission when the channel is already in use.
Overview of the 2-way paging protocol.
Configures the CAL key for call alerts or selcalls.
Sets custom tones for identifying callers.
Enables hearing the call alert tone through the local speaker.
Steps to initiate a call to a group of transceivers.
How to send a call to all transceivers.
How the transceiver displays and handles incoming selective calls.
Adjusts delay for data transmission in specific environments.
Sends a unique identifier with transmissions.
Provides audible feedback for PTT ID transmission.
Temporarily mutes the speaker after receiving a signal to prevent interference.
Shows the ID of the incoming PTT ID signal sender.
Controls the transceiver display's backlight behavior.
Adjusts the microphone's sensitivity to ambient sound.
Limits continuous transmission duration to save battery and prevent channel hogging.
Alerts the user to incoming calls with a tone.
Prevents transmission on an occupied channel.
Enables or disables audible feedback for key presses.
Automatically returns the transceiver to channel display after inactivity.
Configures the tone played when the transceiver is powered on.
Instructions for restoring the transceiver settings to factory defaults.
To Next Page
