Kenwood VR-306 User Manual

VR/KftF-V SETOES (En/KM)
How to use this manual
The manual covers the VR-306. VR-305, VR'355. KRF-V6020, and
KRF-V5020. Items such as functions, number of jacks, and remote
control details differ somewhat between these models. To confirm the
functions available on the model you have purchased, refer to the table
below.
Model name
Remote
Control
Terminal 1
LffffTTg.jlJ
Preout
VR-306
RC-R0711
1 system
SUBWOOFER
Not equipped
VR-305
RC-R0711
1 system
SUBWOOFER
Not equipped
VR-355
RC-R0608
1 system
SUBWOOFER
Not equipped
KRF-V6O20
RC-R0711
2 systems
{A,B)
CENTER,
SURROUND,
SUBWOOFER
Not equipped
KRF-V5020
RC-R0711
1 system
SUBWOOFER
Not equipped
This manual is divided in to four sections. Preparations. Operations, Other.
and Remote Control.
Prepantiotts
Shows you how to connect your audio and video components to the
receiver and prepare the surround processor.
We’ve tried to make setting up your system as easy as possible. However,
since this receiver works with all of your audio and video components,
connecting the system can befairly complex.
Oparations
Shows you howto operate the various functions available from the receiver.
Otiiar
Shows you additional information such as "In case of difficulty" (trouble¬
shooting) and "Specifications".
Rtmae(k>^tm^(Sepanatook^et}(RC ■ ^i0608ollly)
Includes the "Quick Start Guide," which shows you how to operate other
components using the remote control. as well as a detailed explanation of
all remote control operations. Onceyou have registered your components
with the proper setup codes, you'll be able to operate both this receiver and
yourother AVcomponents (TV. VCR, LD player, CD player, etc.) using the
remote control supplied with this receiver.
Special features
Tme home theater sound
This receiver incorporates a wide variety of surround modes to bring you
maximum enjoyment from your video software. Select a surround mode
according to your equipment or the software you are going to play and
enjoyi
Dolby Pro Logic & Dolby 3 Storoo
This surround system repr oduces theate r-like surround sound from
video software marked ixj ipw— m»I
The PRO LOGIC mode uses the built-in adaptive matrix circuit to steer
the Left. Center. Right and Surround channel audio signals.
The 3 STEREO mode will redirect the Surround signal to the front left
and right speakers when only the front and center speakers are used,
Now DSP surround modes
The DSP (Digital Signal Processor) used for this receiver incorporates
a variety of high quality adjustable sound fields, like 'LIVE' and 'HALL".
It is compatible with almost any kind of program source.
OVDS’ChanneUnput
If you own a DVD player equi pped with 6-channel output, this receiver
allows you to obtain the full surround sound impact of DVD source
material featuring multi-channel encoding. Since the source signals are
digital and each channel is input independently, the resulting ambience
is far superior to what can be achieved with conventional surround
sound systems.
UttlversattR(tnfraaed) remote control
(RC-ROmonIr)
In addition to the basic receiver, the remote control supplied with this
receiver can also operate almost all of your remote controllable audio and
video components. Justfollow the simple setup procedure to register the
components you have connected
MACMplay(RC-R06iaottly)
The MACRO function lets you perform a serieSiDf operations automati¬
cally. like turning ON the power of the receiver and connected compo¬
nents, switching the input selectors, and starting playback. (Be sure to
register your components before starting the macro set up procedure.

Kenwood VR-306 Specifications

General

Brand	Kenwood
Model	VR-306
Category	Stereo Receiver
Language	English