Do you have a question about the Kenwood VR-405 and is the answer not in the manual?
Channels | 5.1 |
---|---|
Power Output | 100W per channel |
Impedance | 8 Ohms |
Surround Sound Decoding | Dolby Digital, DTS |
Tuning Range | AM/FM |
Input Sensitivity | 200 mV |
Frequency Response | 20Hz - 20kHz |
Digital Inputs | 1 x coaxial, 1 x optical |
Output | 1 |
Video Connections | Composite |
Inputs | 6 |
Lists and describes the pins of the main microprocessor IC1.
Outlines procedures for adjusting FM discriminator and tuning levels.
Details the process for adjusting distortion levels in the FM section.
Details the FM front-end, RF amplifier, and mixer stages.
Lists parts related to the power amplifier stages, including ICs and transistors.
Details power output, sensitivity, and tone control for U.S. models.