Need help?Do you have a question about the Kenwood VR-414 and is the answer not in the manual?
General| Type | AV Receiver |
|---|---|
| Channels | 5.1 |
| Surround Sound Formats | Dolby Digital, DTS |
| Power Output (8 ohms) | 100 W |
| Total Harmonic Distortion (THD) | 0.08% |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | 100 dB |
| Power Output | 100W per channel |
Lists the receiver models covered by this manual.
Briefly introduces the capabilities of the supplied remote control.
Instructions for unpacking the unit and checking included accessories.
Warnings about voltage selection and electrical hazards for safe operation.
Information regarding FCC regulations and potential radio frequency interference.
Guidance on cleaning the unit and handling contact cleaners.
Explains Dolby, DTS, and 6-channel audio formats for home theater.
Details the remote's ability to control other audio and video components.
Identifies and describes the receiver's front panel elements and indicators.
Details the buttons and operations for the RC-R0609 remote control.
Details the buttons and operations for the RC-R0509 remote control.
Guide for connecting various audio devices to the receiver.
Guide for connecting video devices like VCRs and DVD players.
Specific instructions for connecting DVD players with 6-channel output.
Configuring digital vs. analog input modes for various sources.
How to connect auxiliary audio/video sources using AUX IN jacks.
Instructions for connecting FM and AM antennas for radio reception.
Linking components via system control cords for integrated operation.
Programming the remote control for other KENWOOD components.
Guide for wiring speakers correctly to the receiver terminals.
Inserting batteries and basic operation steps for the remote control.
Configuring speaker types, sizes, and distances for optimal surround sound.
Initial steps required before playing audio or video sources.
Choosing audio/video sources and speaker configurations for playback.
How to select and play various audio and video sources.
Fine-tuning bass, treble, and volume levels for desired sound.
Steps for recording audio from analog sources onto a cassette deck or MD.
Instructions for recording video sources and digital audio signals.
Storing and recalling FM/AM radio stations using the tuner.
Tuning through stored stations sequentially using the P.CALL function.
Detailed explanation of Dolby Digital surround sound technology.
Explains Dolby 3 Stereo and general surround playback modes.
Utilizing multi-channel audio from DVD sources for enhanced playback.
Detailed instructions for playing DVD sources with 6-channel audio.
Covers functions like display dimming, speaker levels, and midnight mode.
Solutions for common problems encountered during operation.
Technical details for the receiver's audio and digital audio sections.
Technical details for video, tuner, and general system specifications.
Introduction to the quick start guide for remote control setup and operation.
Procedure for programming the remote control for other audio/video devices.
Detailed steps for setting up remote control codes for various components.
Using the remote control with registered audio and video devices.
Problems and fixes related to the remote control's operation and setup.
How to control cassette decks using the remote control.
Remote control functions for operating TV, VCR, LD, and DVD players.
Specific fixes and corrections for remote control setup and operation issues.
Essential safety instructions and precautions for operating the appliance.
Section for recording purchase details and serial numbers for warranty purposes.
Details of the product's warranty coverage, exclusions, and terms.
Contact details for customer support, inquiries, and assistance.
To Next Page
