Need help?Do you have a question about the Kenwood VR-606 and is the answer not in the manual?
General| Type | AV receiver |
|---|---|
| Channels | 5.1 |
| Tuning range | AM/FM |
| Surround output | Dolby Digital, DTS |
| Frequency Response | 10Hz to 70kHz |
| Input Impedance | 47k ohms |
| Weight | 11.4 kg |
| Input sensitivity | 200mV (line) |
| Digital inputs | Coaxial, Optical |
| Dimensions | 440 x 143 x 390mm |
| Power Output | 100 watts per channel |
| Video Connections | Composite |
| Signal to noise ratio | 95dB (line) |
| Speaker load impedance | 8 ohms |
| Speaker Impedance | 8 ohms |
Details the various buttons and knobs on the receiver's main unit.
Details the layout of the remote control and the functions of its various keys.
Explains how to make analog audio connections using RCA pin cords.
Guides on selecting input modes (auto, manual, digital, analog) for different inputs.
Instructions for connecting video components, speakers, and antennas.
Guides on connecting DVD players and preparing for surround sound configuration.
Guides on registering setup codes and operating external components with the remote.
Step-by-step guide on wiring speakers and adjusting volume settings for optimal balance.
Guides on measuring and inputting speaker distances for sound timing adjustment.
To Next Page
