Do you have a question about the Kenwood VR-506 and is the answer not in the manual?
Type | AV receiver |
---|---|
Channels | 5.1 |
Surround Sound Formats | Dolby Digital, DTS |
Power Output (6 ohms, 1kHz, THD 0.7%, 1 channel driven) | 100W |
Total Harmonic Distortion | 0.7% |
Power Output | 100W per channel |
Input Sensitivity | 200mV |
Dimensions | 440 x 151 x 328 mm |
Describes the default settings when the microcomputer is initialized.
Explains how the receiver retains settings when AC power is off.
Diagram showing the components connected to the microprocessor unit.
Procedure to enter the test mode by pressing the BAND key and plugging in power.
Procedure to cancel the test mode by unplugging the power cord.
Details test mode operations including Pch CALL UP/DOWN and TUNER mute.