Need help?Do you have a question about the Kenwood VR-407 and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Total Harmonic Distortion | 0.7% |
| Input Impedance | 47k ohms |
| Surround output | Dolby Digital, DTS |
| Input sensitivity | 200mV (line) |
| Speaker load impedance | 8 ohms |
| Digital inputs | 2 optical, 1 coaxial |
| Video Connections | Composite |
| Power Output | 100W per channel |
| Frequency Response | 10Hz |
| Dimensions | 440 x 151 mm |
| Tuning range | FM |
| Output | Speaker |
| Tuner Frequency Range | FM: 87.5-108MHz, AM: 530 - 1710 kHz |
| Signal to noise ratio | 92dB (line) |
Essential safety warnings and guidelines to ensure safe operation before initial use.
Guide for connecting various audio sources and components to the receiver's inputs.
Guide for connecting video sources, displays, and recording devices.
Configuring digital or analog input types for optimal signal playback from sources.
Step-by-step instructions for connecting front, center, and surround speakers correctly.
Adjusting receiver settings based on connected speaker types, sizes, and distances.
Explains Dolby Digital (AC-3) surround sound and its playback requirements.
Details on Dolby Pro Logic surround sound for Dolby Surround encoded sources.
Utilizing multi-channel audio from DVD players for enhanced surround sound.
Technical details on audio output, frequency response, and tuner sensitivity.
Technical details for digital audio inputs, video interfaces, and general unit specifications.
Critical safety instructions regarding power, ventilation, and electrical hazards.
To Next Page
