To Next PageTo Next Page
Need help?Do you have a question about the Kenwood VR-257 and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Input Sensitivity | 200mV (line) |
| Input Impedance | 47k ohms |
| Tuning range | FM, AM |
| Speaker load impedance | 8 ohms |
| Video Connections | composite |
Instructions on initial power connection and voltage selection.
Guide to unpacking the unit and identifying included accessories.
Essential warnings to prevent fire and electric shock.
Explanation of the manual's structure and how to navigate it.
Highlights of the receiver's key capabilities and technologies.
In-depth look at features like Dolby Pro Logic, DSP, and remote control.
Identification and function of front panel buttons, knobs, and displays.
Explanation of the standby mode and its indicator light.
Detailed explanation of all buttons and their operations.
Detailed explanation of all buttons and their operations.
Guide for connecting various audio devices to the receiver.
Explains the dual purpose and setting of VIDEO 2/MONITOR jacks.
Connecting video sources, antennas, and DVD 6-channel input.
Linking KENWOOD components for system control operations.
Setting up remote control codes for external components.
Guide for speaker connection and impedance considerations.
Using pre-out jacks for external power amplifiers.
Optimal positioning for front, center, and surround speakers.
Instructions for inserting batteries into the remote control.
Instructions for inserting batteries into the RC-R0407 remote.
Configuring speaker type, size, and distance for surround sound.
Fine-tuning speaker levels and distance for optimal sound.
Steps to prepare for playback, including receiver and source selection.
Selecting and playing audio/video sources using input selectors.
Adjusting bass, treble, and applying bass boost for sound enhancement.
Functions for muting sound, direct source playback, and headphone use.
Guides for recording audio sources and video signals.
How to tune into, store, and recall radio stations.
Selecting preset stations in order using the P.CALL function.
Introduction to Dolby Pro Logic and Dolby 3 Stereo surround modes.
Using DSP modes and playing back surround sound sources.
Experiencing multi-channel sound from DVD software.
Steps for setting up and enjoying DVD 6-channel surround sound.
Adjusting sound parameters and receiver display brightness.
Adjusting the subwoofer volume using the remote control.
Information on settings retained when power is disconnected.
Procedure to reset the unit for operational errors.
Diagnosing and resolving problems with sound output and reception.
Solutions for issues with remote control operation.
Detailed technical data for audio and video performance.
Technical specifications relevant to international models and general unit details.
