To Next PageTo Next Page
Need help?Do you have a question about the Kenwood VRS-6100 and is the answer not in the manual?
Audio Specifications| rated power output (stereo) | 65 watts per channel |
|---|---|
| effective power output (stereo) | 100 W + 100 W |
| effective power output (surround) | 80 W + 80 W |
| total harmonic distortion | 0.05% |
| frequency response | 20 Hz ~ 90 kHz |
| signal to noise ratio | 96 dB |
Digital Audio Specifications| sampling frequency | 32 kHz, 44.1 kHz, 48 kHz, 96 kHz |
|---|---|
| optical input level | –15 dBm ~ –21 dBm |
| optical wavelength | 660 nm ±30 nm |
| coaxial input level | 0.5 Vp-p |
| coaxial impedance | 75 Ω |
Video Specifications| input sensitivity (composite) | 1 Vp-p |
|---|---|
| output level (composite) | 1 Vp-p |
| impedance (composite) | 75 Ω |
FM Tuner Specifications| tuning frequency range | 87.5 MHz ~ 108 MHz |
|---|---|
| usable sensitivity (mono) | 1.3 µV |
| 50 dB quieting sensitivity (stereo) | 28 µV |
| total harmonic distortion (mono) | 0.5% |
| signal to noise ratio (mono) | 75 dB |
| stereo separation | 40 dB |
AM Tuner Specifications| tuning frequency range | 530 kHz ~ 1, 700 kHz |
|---|---|
| usable sensitivity | 16 µV |
| signal to noise ratio | 50 dB |
General Specifications| power consumption | 120 W |
|---|---|
| dimensions (width) | 440 mm |
| dimensions (height) | 79 mm |
| dimensions (depth) | 357 mm |
| weight | 7.9 kg |
General warnings and precautions for safe operation, fire, and electric shock prevention.
Details the indicators, display, and various buttons on the main unit.
Details the buttons and functions of the remote control unit.
Explains how to select input modes (auto, digital, analog) for audio signal playback.
Illustrates how to connect a DVD player to the receiver, including digital and analog connections.
Shows connections for various audio and video components like VCRs or tape decks.
Details how to connect digital sources like CD players or components with DTS/Dolby Digital.
Provides diagrams and instructions for connecting front, center, surround, and surround back speakers.
Connects speakers and TV to the receiver, referencing earlier setup pages.
Guides through speaker setup, including KENWOOD systems and custom configurations.
Instructions to select "DVD" input and start playback of a disc.
Detailed guide to configure speaker system type, subwoofer, front, center, surround, and back speakers.
Covers Bass Boost, Loudness, and ACTIVE EQ modes for sound customization.
Overview of various surround modes like Dolby Digital EX, Dolby Pro Logic IIx, and Dolby Digital.
Procedure to reset the microcomputer if the unit malfunctions or displays errors.
