To Next PageTo Next Page
Need help?Do you have a question about the Kenwood VR-6070 and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity | 200mV (line) |
| Signal to Noise Ratio | 100 dB |
| Power Output | 100 watts per channel into 8Ω (stereo) |
| Tuning range | FM: 87.5-108 MHz, AM: 530-1700 kHz |
| Frequency Response | 10 Hz - 100 kHz |
| Speaker Load Impedance | 8 ohms |
| Digital Inputs | 2 (optical), 1 (coaxial) |
| Video Connections | 3 x composite, 1 x S-Video |
Details on setting the AC voltage selector switch to match your line voltage for safe operation.
Essential safety warnings to prevent fire, electric shock, and damage to the appliance.
Instructions for unpacking the unit and verifying all accessories are present.
Diagram and instructions for connecting audio sources like CD players, tape decks, and record players.
Guides for connecting video sources using S-Video and RCA jacks.
Information on unit maintenance and memory back-up function details.
Compliance notices and warnings regarding FCC regulations for the device.
Overview of various surround sound modes like THX, Dolby Digital, and DTS.
Explanation of Digital Signal Processor modes for creating ambiance.
Details on universal IR remote control and RF remote signal functions.
Identification of controls and indicators on the main receiver unit.
Identification of buttons and functions on the remote control unit.
Diagram and instructions for connecting audio sources like CD players, tape decks, and record players.
Guides for connecting video sources using S-Video and RCA jacks.
Instructions for connecting digital audio sources like optical and coaxial.
Detailed guide on connecting front, center, surround, and subwoofer speakers.
Guide to configuring speaker size, distance, and level settings for optimal surround sound.
Steps to prepare the receiver and source components before playback.
Instructions on selecting and listening to various audio sources.
Details on adjusting volume, tone, loudness, and muting the sound.
Procedures for recording analog and digital audio sources.
Instructions for recording video sources.
Guide to tuning non-RDS radio stations using band and tuning controls.
Explanation of RDS functions like PS, RT, and PTY search.
Methods for manually storing and receiving preset radio stations.
Details on Dolby Digital EX, Dolby Digital, DTS-ES, and THX Surround EX modes.
Explanation of DSP modes, DVD 6-channel, and SRS Circle Surround II.
Features like Midnight Mode, Panorama, Dimension, and TruBass adjustments.
Procedure for registering setup codes to control other manufacturers' components.
Instructions for operating registered components using the remote control.
Lists of setup codes for TV, VCR, DVD, CD, and DSS/SAT components.
Common symptoms, causes, and remedies for amplifier and tuner problems.
Troubleshooting steps for remote control operation problems.
Technical specifications for the VR-6070 receiver, including audio and tuner details.
Technical specifications for the KRF-X9060D receiver, including audio and tuner details.
Guidance on power sources, cord protection, and ensuring proper ventilation.
Precautions regarding water, moisture, temperature, heat, and magnetic fields.
Safety advice on electrical shock, cleaning, and replacement parts.
Guidelines for servicing, lightning protection, and abnormal conditions.
