To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KRF-VR-615 and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Frequency Response | 10Hz to 70kHz |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity | 200mV (line) |
| Signal-to-Noise Ratio | 100 dB |
| Dimensions | 17.1 x 15.5 x 5.3 inches |
| Weight | 26.5 lbs |
| Power Output | 100 Watts per channel (8 ohms) |
| Tuning range | FM: 87.5-108MHz, AM: 522-1611kHz |
| Speaker load impedance | 8Ω to 16Ω |
| Digital inputs | Optical and coaxial |
| Video Connections | Composite and S-Video |
Procedure to reset the microcomputer and restore the unit to its factory state.
Details items deleted from memory when the power cord is disconnected for an extended period.
Details model discrimination and tuner destination settings.
Information regarding the tuner's preset memory stations.
Procedures for entering, cancelling, and contents of the test mode.
Information on the microcomputer, its peripherals, and pin descriptions.
Detailed pin descriptions for various integrated circuits, including CODEC and FL Driver.
Information on the digital audio decoder and its pin descriptions.
Visual representation of component placement on the unit.
Guide on understanding the abbreviations and format of the parts list.
Detailed audio performance parameters for different regions and models.
Technical specifications for digital audio input and processing.
Performance specifications for FM and AM tuners, including sensitivity and frequency response.
Power consumption, dimensions, and weight of the unit.
