Setting
up
the
system
Connecting
the
system
control
Connecting system control cords after connecting a KENWOOD
audio component system lets you
take
advantage of convenient
system control operations.
This unit
is
compatible only
with
the
[SL-161 mode. The system
control operation
is
not
avail~ble
if
the
unit
is
connected
in
the
[XS8l, [XSl, or (XRl connection mode.
If
your component has
the
mode
select switch, set
the
connected
components to
the
[SL16] mode.
~
f--==e:=IJm=
l5l.l6J
SYSTEM CONTROL
© cord
• You may connect the system control cord to either the up
or
down
Jack
EXAMPLE: [SL16]
mode
connections
The underlined portion represents the setting
of
the system control
mode.
SYSTEM
CONTROL
OPERA
TlONS
Remote Control
Lets you operate this unit
with
the system remote supplied
with
the
receiver
Automatic Operation
When you start playback from a source component, the inputselector
on
this unit switches to that component automatically.
Synchronized Recording
Lets you synchronize recording
with
the start of playback
when
recording from
CD,
MD
or analog discs.
Registering
setup
codes
for
KENWOOD
audio
components
If you
own
remote controllable KENWOOD audio components that
are not compatible
with
system control, registering the setup code
enables you to control those components using the remote control
supplied
with
this unit (without connecting system control cords). To
register setup codes for your remote controllable KENWOOD audio
components,
see"
Registering setup codes for
other
components".
-CllJ
[SL16]
(SL
161lXSl
(XS81
(XRJ
[SL
161
[XS] (XS81
[XS]
IReceiver
I
Cassette deck
or
MD
recorder
I CD player
IRecord player I
SYSTEM
CONTROL
cord
•
In
order to take advantaye of the system control operations, the
cornponents must be connected to the correct jacks
To
use a
CD
player it
must
be
connected to the
CD
jacks To use a cassette deck
(or
MD
recorder) it
must
be connected to the MD/TAPE jacks When
uSing more than one
CD
player (etc.) only the one connected
to
the
specified jacks may
be
connected for system control.
• Some
CD
players
and
cassette decks are not compatible
with
the
[SL
161
system control mode Do not make system connections
with
equipment that is not ISL
161
compatible.
• Some
MD
players are not system control compatible
You
cannot
make system control connections to this kind
of
equipment.
Notes
1
[SL
161
equipment cannot be combined
with
[XRI.
IXSI. and
IXS81
equipment for system operations. If your equipment consists
of
this kind of combination, please do not connect any system con-
trol cords Even
without
system control cords, normal operations
can be carried
out
without
effecting performance
2 Do not connect system control cords to any components other
than those specified by KENWOOD It may cause a malfunction
and damage your equipment.
3
Be
sure the system control plugs are inserted
allthe
way
in
to the
system control terminals
To Next Page
Loading...
Need help?
General
