Kenwood VR-7070 User Manual

B60-5343-00 00 MA (K, P) 0209
AUDIO VIDEO SURROUND RECEIVER
VR
-
7070
INSTRUCTION MANUAL
KENWOOD CORPORATION
About the supplied remote control
Compared to standard remote controls, the remote control supplied with this receiver has several
operation modes. These modes enable the remote control to control other audio/video components. In
order to effectively use the remote control it is important to read the operating instructions and obtain a
proper understanding of the remote control and how to switch its operation modes (etc.).
Using the remote control without completely understanding its design and how to switch the operation
modes may result in incorrect operations.

Kenwood VR-7070 Specifications

General

Input Sensitivity	200 mV
Signal-to-Noise Ratio	100 dB
Input sensitivity (MM)	2.5 mV
Signal to noise ratio (MM)	80 dB
Digital inputs	coaxial, optical
Video Connections	Composite, S-Video
Power Output	100 watts per channel
Tuning range	FM, AM
Speaker load impedance	8 ohms
Dimensions (metric)	440 x 162 x 439 mm