EasyManuals Logo

Kenwood VRS-N8100 Divx Playback Guide

Kenwood VRS-N8100
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Playback of DivX
®
VIDEO
Select Audio Language
You can change the Audio language while you’re watching
a DivX
®
VIDEO (but only if the file was created with multiple
Audio tracks).
During playback, press the PAGE key on the remote.
The language is switched each time the PAGE key is
pressed.
÷ The display is switched off when no operation is performed
for about 3 seconds.
÷ The Audio feature only works if the file was created with mul-
tiple audio tracks.
Select Subtitle Language
You can change the Subtitle language while you’re watch-
ing a DivX
®
VIDEO (but only if the file was created with sub-
titles).
During playback, press the PAGE 5 key on the remote.
The language is switched each time the PAGE 5 key is
pressed.
÷ The display is switched off when no operation is performed
for about 3 seconds.
÷ The Subtitle feature only works if the file was created with
multiple subtitle tracks.
DivX
®
VOD
When “DivX(R) VOD” is selected and the ENTER key is
pressed, a registration code is displayed.
For details, see the Web page of DivXNetworks, Inc.
<http://www.divx.com/vod>
Main
IP
Back Back
DivX(R) VOD
English
4:3
PAL CVBS & RGB
ON
7.5 IRE
NET LINK
Network Setup
Menu Language
TV Aspect
Video Out
Screen Saver
Black Level Setup
Fifmware Update
Setup TV Aspect
Select the aspect ratios.
1 Select “Network Setup” and press the ENTER.
Refer to “Network settings” of the Instruction
Manual. §
2 Select “TV Aspect” and press the ENTER.
Main
IP
NET LINK
English
NTSC/CVBS/Y/C
16:9
Back
BackBack
Network Setup
DivX(R) VOD
4:3
Menu Language
TV Aspect
Video Out
Screen Saver
Black Level Setup
Fifmware Update
3 Use the MULTI CONTROL %/ to select the as-
pect ratios, and press the ENTER.
1 "4:3": Select when a standard 4:3 TV is connected.
2 "16:9": Select when a 16:9 wide TV is connected.
ENGLISH
B58-1936/** 04.9.9, 5:01 PM1

Other manuals for Kenwood VRS-N8100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenwood VRS-N8100 and is the answer not in the manual?

Kenwood VRS-N8100 Specifications

General IconGeneral
Channels7.2
Network ConnectivityEthernet, Wi-Fi
USB Ports1
3D SupportYes
Dolby AtmosYes
DTS:XYes
HDCP Version2.2
Zone OutputZone 2
Frequency Response10 Hz - 100 kHz (+1 dB, -3 dB)
Signal-to-Noise Ratio100 dB
Input Sensitivity200 mV
Speaker Impedance6-16 ohms
Audio Formats SupportedDolby Digital, DTS
Streaming ServicesSpotify, Deezer, TIDAL
HDMI Inputs6
HDMI Outputs2
4K SupportYes
BluetoothYes
AirPlayYes
Total Harmonic Distortion0.08%
Power Output100W per channel (8 ohms, 20Hz-20kHz, 0.08% THD, 2 channels driven)

Related product manuals