12 ADB_ADJ-BA-e-1830
Put the following parts upon in the right order
• Carrier of weighing plate
• Weighing pan
7.3 Levelling
Level balance with foot screws until the air bubble of the water balance is in the
prescribed circle.
Check levelling regularly.
7.4 Electric power supply
Select a country-specific mains plug.
Check, whether the voltage acceptance on the scales is set correctly.
Do not connect the scales to the power grid unless the information on
the instrument (sticker) matches the local mains voltage.
Only use KERN original mains adapter. Using other makes requires
Important:
Prior to commissioning check the mains cable for damage.
Make sure that the mains adapter will not be in touch with liquids.
The mains plug must be accessible at any time.
Connect the mains adapter to the connecting socket on the backside of
the balance and to the power mains.
The display unit lights up. As soon as the balance is supplied with ener
the indicator [ ] is displayed.
The error
message <P
FAIL> i
ndicates
that
the bal
ance w
as
disconnected from power supply without pressing the ON/OFF button.
Remedy:
Press ON/OFF. The device will carry out a display test.
The balance is ready for weighing once the weight indication appears.
To Next Page
Loading...
Need help?
General
