26 ADB_ADJ-BA-e-1830
11.2 Menu overview
Menu item Settings Description
Adjustment mode C1 - 0
Internal adjustment (ADJ models:
always use this setting)
C1 – 1
External adjustment (ADB models:
always use this setting)
Reference quantity C2 – 0* 10
C2 - 1 20
C2 - 2 50
C2 - 3 100
C2 - 4 1000
Automatic
zero point correction
C3 – 1* 1D Zero-point Tracking
C3 - 2 2D Zero-point Tracking
C3 - 3 3D Zero-point Tracking
C3 - 4 4D Zero-point Tracking
C3 - 5 5D Zero-point Tracking
C3 - 6 Not documented
Baud rate C4 - 0 1200
C4 - 1* 2400
C4 - 2 4800
C4 - 3 9600
Data output C5 - 0
Automatic output of stable weighing
values
C5 - 1 Via remote control command W (w)
C5 - 2 Continuous data output
C5 – 3*
Output for stable and instable weighing
values after pressing PRINT key
Sound by pressing
the button
C6 – 0 switched on
C6 - 1* switched off
Automatic internal adjustment
having connected the electrical
power (only ADJ models)
C7 - 0* switched on
C7 - 1 switched off
Filter C8 - 0* Low interference degree
C8 - 1 Medium interference degree
C8 - 2 High interference degree
C8 - 3 Not documented
* = factory setting
To Next Page
Loading...
