ADB_ADJ-BA-e-1830 29
12.3.2 Output condition
The data transfer type is determined in this menu item
Call up menu item „C5“, see chap. 11.1
Use the PRINT key to select the desired setting.
Options:
C5 - 0
Automatic output of stable weighing values
C5 - 1
Via remote control command W (w)
C5 - 2 Continuous data output
C5 - 3 Output for stable and instable weighing values
after pressing PRINT key
Save / back to weighing mode, see chap. 11.1
To Next Page
Loading...
