KERN ALS Series Operating Instruction

TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2112 51
Symbol Description
<Continuous>
Continuous data transfer
<On demand>
Sending the stable weighing value after the
PRINT button is pressed
<Generic printer>
Sending data to the standard printer
following the remote control request.
<Printer TLP>
Sending data to the printer supporting the
LP-50 protocol.
<On demand – GLP>
The setting used to obtain printouts
conforming to GLP, after the PRINT button is
pressed
<Generic print.-GLP>
The printout conforming to GLP on a
standard printer following the remote setting
request
<Printer Tlp – GLP>
The printout conforming to
GLP on the
printer supporting the LP-50 protocol
 Confirm the selection, pressing the PRINT
button. The scale will be switched to
the menu again.
 Return to the weighing mode, pressing the ON/OFF button.
11.3 Transmission speed
 Using the navigation buttons

, select the menu item <Baud rate>.
 Confirm by pressing the PRINT button, the current setting will be displayed.
 Using the navigation buttons

, select the required setting.
It is possible to select 1,200, 2,400, 4,800 or 9,600 bauds.
 Confirm the selection, pressing the PRINT
button. The scale will be switched to
the menu again.
 Return to the weighing mode, pressing the ON/OFF button.

KERN ALS Series Specifications

General

Brand	KERN
Model	ALS Series
Category	Scales
Language	English