Need help?Do you have a question about the KERN CKE Series and is the answer not in the manual?
Technical specifications for KERN CKE models.
Technical specifications for KERN CDS models.
Guidelines for correct and intended use of the balance.
Warnings against incorrect operations that can damage the balance.
Conditions that void the balance's warranty claims.
Procedures for checking balance properties and test weights.
Emphasizes reading the manual before setup and operation.
States that only trained personnel should operate and maintain the appliance.
Instructions for checking the appliance for damage upon delivery.
Guidelines for proper packaging for returns or transport.
Guidance on selecting an appropriate and stable location for the balance.
Steps for carefully removing and placing the balance correctly.
Instructions for power connection and peripheral device setup.
Steps for the first-time setup and stabilization of the balance.
Process for calibrating the balance to local gravity conditions.
How to check and re-adjust weighing accuracy with an adjustment weight.
Legal requirements for balance verification in specific commercial uses.
Explains the functions of buttons and indicators on the balance control panel.
Details on balance accuracy adjustment and speed configuration.
Configuration and function of the automatic power-off feature.
How to control and use the balance display's backlight.
Technical data and setup for data transfer via RS 232 interface.
Explains data transfer structure, commands, and numerator functions.
Using the printer and underfloor weighing facility for advanced operations.
Guidelines for safely cleaning the balance without damaging it.
Information on authorized service technicians for appliance maintenance.
Procedures for legally disposing of the balance and its packaging.
Lists common faults, their potential causes, and basic solutions.
To Next Page
General
