Need help?Do you have a question about the KERN CM and is the answer not in the manual?
Defines the balance's primary purpose for determining weighing values of materials.
Lists prohibited uses like dynamic weighing, overloading, or use in hazardous locations.
Outlines conditions under which the guarantee becomes invalid.
Details regular checks of metrology features and adjusting weights for quality assurance.
Emphasizes reading instructions before erection and commissioning.
States that the device must only be operated by trained staff.
Instructs to check packaging and device for damage upon delivery.
Advises retaining original packaging for returns and consignments.
Guides on selecting a firm, level surface and avoiding environmental factors.
Details how to carefully remove the balance from packaging.
Ensures the weighing plate is absolutely horizontal during installation.
Lists standard accessories included with the pocket balance.
Explains battery conservation, low battery indication, and replacement procedure.
Describes the correct use of the draft shield and weighing container.
Recommends a 1-minute warm-up time for stabilizing measured values.
Explains the necessity of coordinating the balance to local gravity and temperature.
Provides the procedure for checking and adjusting balance accuracy with a precision weight.
Illustrates and explains the display elements for specific balance models.
Illustrates and explains the display elements for the CM 50-C2N model.
Illustrates and explains the display elements for the CM 500-GN1 model.
Identifies and describes the functions of the balance's control buttons.
Details the steps for turning on the balance and placing objects for weighing.
Explains how to zero out the weight of a container or previous measurement.
Describes the procedure for controlling piece-weights by comparing deviations.
Explains how to sum multiple components weighed in a tare cup.
Details how to select and convert between different weighing units.
Provides instructions for adjusting the backlight mode to save battery or improve visibility.
Lists the functions and buttons of the integrated pocket calculator.
Gives instructions for safely cleaning the balance using mild agents.
States that only authorized service engineers should open the device.
Advises on disposing of packaging and device according to local laws.
Lists possible causes for the display not showing any illumination.
Identifies factors like draughts, vibrations, or electromagnetic fields causing display instability.
Covers causes like incorrect zero setting, temperature fluctuations, or electromagnetic interference.
To Next Page
General
