Need help?Do you have a question about the KERN CM 150-1 and is the answer not in the manual?
Carefully remove the balance from packaging and plastic covering.
Position the balance on a stable, horizontal base.
Instructions for inserting, conserving, and replacing batteries.
Steps to power on, zero, and perform a weighing operation.
How to use the TARE key to zero the balance with containers.
Controlling piece-weights and deviations from a rated weight.
Weighing mixtures and summing component weights.
Procedure to control and set balance accuracy with an adjusting weight.
Carefully remove the balance from packaging and plastic covering.
Position the balance on a stable, horizontal base.
Instructions for inserting, conserving, and replacing batteries.
Steps to power on, zero, and perform a weighing operation.
How to use the TARE key to zero the balance with containers.
Controlling piece-weights and deviations from a rated weight.
Weighing mixtures and summing component weights.
Procedure to control and set balance accuracy with an adjusting weight.
To Next Page
General
