EN
31
CHAPTER 6. REPLACING LAMPS
Disconnect the hood from the electricity.
Warning!Priortotouchingthelightbulbsensuretheyarecooleddown.
1.Usingaflatheadscrewdriverorequivalenttool,carefullypryloosethe
lightcover.
2.Remove the damaged light and replace with a new SUITABLE FOR
USEINOPENLUMINAIRES.
Followpackagedirectionsanddonottouchnewlightwithbarehands.
3.Reinstallthelightcover.(itwillsnapshut).
Ifthelightsdonotwork,makesurethatthelampsarefittedproperlyintotheir
housingsbeforeyoucallfortechnicalassistance.
.