34
BRIDGE FUNCTION
This function allows the use of 2 cooking zones at the same time with the same features as a single cooking
zone. With this function the Booster function isn’t allowed.
Bridge function selection
Press at once 2 left selection keys
Front [ 0 ] and rear [ ∏ ]
Slide on the „SLIDER” [ 1 ] to [ 9 ]
Press at once 2 left selection keys [ O ]
[ 0 ] or [ H ] on both heating
zones
KEEP WARM FUNCTION
This function allows to reach and maintain automatically a temperature of 70°C. This will avoid liquids
overflowing and fast burning at the bottom of the pan.
Press key [ ] on the “SLIDER”
Press key [ ] selected
Slide on the “SLIDER”
[ U ]
[ 0 ] to [ 9 ] or [ H ]
STOP & GO FUNCTION
This function brakes all the hob’s cooking activity and allows restarting with the same settings.
Displays [ II ] on the heating zone
display
Press [ II ] during 2s
Press another key or slide on the
“SLIDER”
Pause control light is blinking.
Pause control light is off.
RECALL FUNCTION
After switching off the hob ([ ]), it is possible to recall the last settings
• cooking stages of all cooking zones (power)
• minutes and seconds of programmed cooking zone-related timers
• heat up function
The recall procedure is following:
• Press the key [ ]
• Then press the key [ II ] within 6 seconds.
The precedent settings are activated.
TIMER
The timer is able to be used simultaneous with all heating zones and this with different time settings (from 0
to 99 minutes) for each heating zone.
• Setting and modification of the cooking time
To Next Page
Loading...
Need help?
General
