Kessil AP700 APP User Manual

AP700 APP
Android Tablet User Manual
Connection
Download App
Step
1
Connect Lamp (Follow the instructions on Android Tablet App)
Step
2
Android operating system version 4.0 or above is required.
Below resolutions are supported: 1024 x 600, 1024 x 768, 1280 x 720, 1280 x 800,
1920 x 1200, 2048 x 1536
Open “App Store”, Search for and Download “Kessil WiFi Controller”.
.
.
.
POWER WiFi
Make sure the AP700 is connected to a
wall outlet through power adapter.
Touch the button to turn on the AP700.
Press and simultaneously to turn on
WiFi. WiFi Indicator will flash.
Open “ Kessil WiFi Controller ” and click “
Add New Lamp ”.
.
.
.
.
1
6 Wait for around 30 seconds to load data (Additional lamps may require longer loading times).
7 When lamp interface appear(s), the AP700(s) can be controlled via app. If no new lamp interface appears, press
at the top right corner).
Connect Direct to AP700
1 Make sure the AP700 WiFi indicator is flashing and press “Next”.
2 Exit App and open “Settings”> “Wi-Fi”, then connect to AP700 (WiFi
SSID:Kessil_KDxxxxxxxx) (WiFi SSID Label can be found on AP700).
* Make sure it is connected and the WiFi fan signal at top right corner appear.
Go back to the app and press “Next”
3 Create own password for the AP700, then press “Next”.
4 Exit app and open “Settings” > “WiFi”. Connect to AP700 (WiFi SSID:Kessil_KDxxxxxxx)
and enter the password. Return to app and press “Next”.
* Make sure it is connected and the WiFi fan signal at top right corner appear.
5 If only connecting one AP700, press “Done”. If connecting more than one AP700, press
“Set Next Lamp”
i Repeat 1. and 2.
ii Make sure the first AP700’s WiFi SSID is shown and password matches.
iii Press “Next”.
iv Exit app and open “Settings” > “Wi-Fi”. Connect to first AP700.
* Make sure it is connected and the WiFi fan signal at top right corner appear.
v Press “Next” and press “Done” if you have connected all AP700(s). Press “Add
Another AP700” and repeat steps if you have more to connect.
WiFi SSID : Kessil_KDxxxxxxxx
(WiFi SSID Label can be found on AP700)

Kessil AP700 APP Specifications

General

Brand	Kessil
Model	AP700 APP
Category	Tablet
Language	English

Summary

AP700 App Connection

Download Kessil WiFi Controller App

Instructions for downloading the Kessil WiFi Controller app for Android.

Connect AP700 Lamp via App

Steps to connect the AP700 lamp using the Android tablet app.

Direct AP700 Connection Method

Procedure for establishing a direct connection to the AP700 device.

AP700 Wireless Router Connection

Connect AP700 via Wireless Router

Steps to connect the AP700 to a wireless router for app control.

AP700 Control Interface

Control Lamp Interface Overview

Overview of the AP700's control lamp interface elements and functions.

Manual Mode Control Instructions

Instructions for operating the AP700 in Manual Mode, including color and intensity.

AP700 Program Mode

Edit Custom Light Programs

Creating and editing custom light programs, adding points and effects.

Acclimation Mode Setup

Setting up acclimation schedules to gradually adjust light intensity for creatures.

AP700 Lunar Cycle Features

Configure Lunar Cycle Settings

Configuring ramp up/down schedules or moonlighting features with specific times and colors.

AP700 App Support

Check App Version and Update

Verifying the current version of the Kessil WiFi Controller app and ensuring it's updated.

Reset AP700 App Data

Procedure for deleting app data, colors, and disconnecting the AP700.

Contact Kessil Support

How to contact Kessil customer support via email or social media channels.

AP700 FAQ and Troubleshooting

Troubleshoot AP700 WiFi Connection

Solutions for common issues preventing tablet connection to AP700 WiFi.

Resolve Missing Lamp Information

Steps to fix issues where lamp information is missing after WiFi setup.

Fix App Crashes During Connection

Resolving app crashes that occur during the AP700 connection process.

Troubleshoot Missing Lamps

Steps to resolve issues where one or more lamps are missing from the app.

Manage AP700 Connections

Instructions on how to delete existing connections with the AP700 device.

Synchronize Multiple AP700 Lamps

Guidance on synchronizing multiple AP700 lamps into groups.

Address Power Outage Issues

Remedies for problems that may occur after an electric power interruption.

Fix Program Mode Synchronization

Resolving synchronization problems between the app and lamps in Program Mode.

Understand Program Mode Saving

Explanation of limitations regarding saving Program Mode templates.