7
Please visit www.nkhome.com/kestrel/DROP for more information.
Battery Replacement
(Please note: After battery replacement, you MUST reconnect to the Kestrel Connect application to ensure
time and date are updated for logging purposes.)
Figure 2: Battery Replacement
If Battery Is Inserted
Unit is on. (Only powers off if battery is removed)
Bluetooth is on.
DROP is logging data.
LED Condition Status Button Possible Conditions
Pressed Unit is functioning normally.
Not Pressed Battery was inserted.
Bluetooth has connected successfully.
Bluetooth has disconnected successfully.
Note: Status button can be used to immediately send a connection signal to your iOS device.
LED Indicators
To Next Page
Loading...
