System Settings
Press and hold the "SET" key and then press the "RESET" key at
the same time.
With the combination of keys the settings from date / time / km
or miles display / background colour / user configuration are
activated following switching on / factory settings.
First the date setting will appear with the display "date". You
can set the day, month and year here.
Pressing "plus" or "minus" changes the flashing displays. Pres-
sing "set" closes the input screen and jumps to the next setting,
time with the display "time".
Pressing "plus" or "minus" changes the flashing displays. Pres-
sing "set" closes the input screen and jumps to the next setting.
You can decide whether kilometres or miles should be displayed
here.
Pressing "plus" or "minus" changes from (metric km) to (imperial
miles). Pressing "set" closes the input screen and jumps to the
next setting, background colour with the display "colour". You
can change the display's background colour here.
0=off, 1= light blue, 2=red, 3=green, 4=blue, 5=turquoise.
Pressing "plus" or "minus" changes the colour. Pressing "set"
closes the input screen and jumps to the next setting, last person
with display "Last Person". You decide here whether the current
person be configured after the machine has been switched on
or reset.
Pressing "plus" or "minus" changes the setting. Pressing "set"
closes the input screen and jumps to the next setting, factory set-
tings with the display "Reset All - / +."
“
Pressing "plus" and "minus" together restores factory settings
and deletes all data and settings. Pressing "set" skips this func-
tion. The input is completed.
Firmware Update
At the top left of the display "Reset All - / +" the firmware num-
ber is indicated, in this case 3089. On our homepage
www.kettler.net > sport > service center you will find any soft-
ware updates (firmware) for this machine, including installation
instructions for these.
.
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
+
9
GB
SJ
To Next Page
Loading...
Need help?
General
