EasyManua.ls Logo

Keurig B30 - Troubleshooting; Brewer Power and Brewing Issues; Partial Brew and Auto Shut-off

Keurig B30
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
SECTION 3
TROUBLESHOOTING
SITUATION SOLUTION
Brewer will not brew
when used for the
first time
• Plug Brewer into an independent outlet.
• Check to be sure that it is plugged in securely.
• Plug into a different outlet.
• Reset circuit breaker if necessary.
• Make sure that the Power Button has been turned on and is
illuminated.
• If Brewer is cold/frozen, wait for at least two hours for it to reach
room temperature before powering on.
Brewer will not brew
• Check to make sure there is water in the Hot Water Tank.
Place a cup on the drip tray plate.
• Check to be sure you are not using a clear, glass mug. Cup sensor
will not "read" the glass mug and the "Place Mug" light will flash.
Brewing a partial cup • The Exit Needle may be clogged. (refer to page 3).
• Clean K-Cup Holder if necessary and rinse under faucet. (refer to page 3).
• Descale the Brewer (refer to page 4).
• If you have repeated the descale procedure on your Brewer two times
and the Brewer is still not brewing, contact Customer Service at
1-866-901-BREW (2739).
Brewer does not
have power
If any problems persist, contact Customer Service at 1-866-901-BREW (2739).
My brewer shuts off
automatically
• Check to make sure that there is a cup on the drip tray plate.
b09773_B30_Gourmet_UseCare_Guide 2008.5.8 10:52 AM Page 5

Related product manuals