EasyManua.ls Logo

Keurig Eccellenza Momentum User Manual

Keurig Eccellenza Momentum
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
ECCELLENZA MOMENTUM CLEANING & STARTUP PROCEDURE
This procedure demonstrates how to properly clean
and sanitize the Eccellenza Momentum brewer
This procedure should take approximately 60 minutes
Tools Needed
 Keurig
®
Bean to Cup Deep Cleaning kit (if available)
 Large bucket or container
 Available sink
 Phillips screwdriver
 Key to main door
 Small paint brush

Other manuals for Keurig Eccellenza Momentum

Question and Answer IconNeed help?

Do you have a question about the Keurig Eccellenza Momentum and is the answer not in the manual?

Keurig Eccellenza Momentum Specifications

General IconGeneral
BrandKeurig
ModelEccellenza Momentum
CategoryCoffee Maker
LanguageEnglish

Summary

Disconnecting & Draining the Brewer

Removing Brewer Components

Removing the Brewer Assembly

Procedure to detach the brewer assembly from the main unit for cleaning or maintenance.

Removing the Coffee Hopper

Steps to unlock and lift the coffee hopper from the machine for cleaning or refilling.

Removing the Powder System

Detailed steps for disconnecting and removing the powder dispensing system components.

Cleaning Procedures

Cleaning Interior Components

Guide to wiping down interior areas and removing powder residue with brushes.

Cleaning & Sanitizing Solutions

Instructions for preparing and using cleaning and sanitizing solutions for parts.

External Surface Cleaning

Recommendations for cleaning the brewer's exterior surfaces using sanitizing solution.

Reinstalling Brewer Components

Reinstalling the Powder System

Steps to correctly reassemble and reinstall the powder system components after cleaning.

Reinstalling the Brewer Assembly

Procedure for reattaching the brewer assembly and its spout to the main unit.

Reinstalling the Coffee Hopper

Guide to properly placing and securing the coffee hopper back onto the grinder.

Restarting & Refilling the Brewer

Performing Interface-Guided Cleaning & Rinses

Accessing Maintenance Menus

Steps to access maintenance menus for initiating cleaning and rinsing cycles.

Grinder Cleaning Cycle

Detailed instructions for running the automated grinder cleaning cycle via the interface.

Brewer Cleaning Cycle

Steps to initiate and complete the brewer cleaning cycle using cleaning tablets.

Mixers Rinse Cycle

Guide to running the mixers rinse cycle to clean powder whipper systems with hot water.

Final Steps and Testing

Cleaning the Lower Tray and Grill

Instructions for removing, cleaning, and reinstalling the brewer's lower tray and grill.

Performing Test Brews

Procedure for refilling hoppers and performing test brews to ensure functionality.

Related product manuals