To Next PageTo Next Page
Need help?Do you have a question about the Keurig Vue and is the answer not in the manual?
General| Strength Control | Yes |
|---|---|
| Temperature Control | Yes |
| Energy Saver Mode | Yes |
| Programmable | Yes |
| Touchscreen Interface | Yes |
| Model | Vue |
| Category | Coffee Maker |
| Voltage | 120 V |
| Auto Off Feature | Yes |
| Removable Drip Tray | Yes |
| Pod Type | Vue Packs |
| Power | 1500 W |
| Color Options | Black, Silver |
| Brew Sizes | 4, 6, 8, 10, 12 oz |
Remove adhesive tape and touchscreen label. Plug into grounded outlet.
Remove Water Reservoir Lid and lift reservoir away from the brewer. Rinse with fresh water.
Return the reservoir to the brewer and fill with water. Bottled or filtered water is recommended.
Place mug on drip tray, press power, and wait for 'Lift to Brew' signal (approx. 4 min).
Lift and lower handle, then press 'BREW' to dispense hot water into the mug.
Place mug on drip tray, lift handle, insert Vue Cup, and lower handle.
Choose beverage strength and size using the touchscreen, then press 'BREW'.
Allow hot cups to cool, then peel back the tab to separate foil lid and filter.
Recycle cups where #5 plastics are accepted, checking local community guidelines.
