EasyManua.ls Logo

Keurig K-Iced Essentials - Page 3

Keurig K-Iced Essentials
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Caring For Your Brewer
Regular cleaning keeps your brewer running smoothly. Always be sure to turn off and unplug your brewer before cleaning.
The water reservoir should be
cleaned periodically by wiping the
inside of the reservoir and underside
of the lid with a damp, nonabrasive,
lint-free cloth. Do not dry the inside
of the water reservoir with a cloth, as
lint may remain. Allow the reservoir
to dry completely. Hand-wash only.
Brewer Exterior
Keep your Keurig® brewer looking its
best by cleaning the exterior from
time to time. Just clean with a damp,
soapy, lint-free, nonabrasive cloth.
Never immerse the brewer in water or
other liquids.
Drip Tray
The drip tray overflow should be emptied and
cleaned occasionally. To remove, lift up off
brewer base, keeping it level to avoid spilling.
Rinse and clean with a damp, soapy, lint-free,
nonabrasive cloth. Hand-wash only.
Water Reservoir
Brewer Features
FAST & FRESH-BREWED: Coffee made in minutes.
BREW OVER ICE: Brew a refreshing iced coffee in minutes.
The BREW OVER ICE feature automatically adjusts brew
temperature — starting hotter to help extract full flavor, then
cooling down for less ice melt.
BACK-TO-BACK BREWING: Immediately brew a second cup;
no need to wait for reheating.
TRAVEL-MUG FRIENDLY: Accommodates travel mugs up
to 7” tall.
SIMPLE BUTTON CONTROLS: Just insert any K-Cup® pod
and use the button controls to brew a delicious cup.
MAINTENANCE ALERT: Reminds you to descale after every
250 brews.
COMPATIBLE WITH THE MY K-CUP® UNIVERSAL REUSABLE
COFFEE FILTER:
Brew your own ground coffee (sold separately).
AUTO OFF: Automatically turns your brewer off 5 minutes
after the last brew for energy savings, but will be ready to
brew as soon as it is powered on again.
HIGH ALTITUDE: To ensure your brewer works properly at
higher altitudes (5,000 feet), please enable the High Altitude
Brewing Mode on your brewer.
1. Begin with the brewer plugged in and powered off.
2. Press and hold the POWER button and 10oz button for 3
seconds. The 12oz button will illuminate to confirm that the
High Altitude Brewing Mode has been enabled.
3. High Altitude Mode will remain enabled until steps 1-2
are repeated and the 12oz light turns off and the 8oz light
turns on to confirm that the High Altitude Brewing Mode is
disabled.
HIGH ALTITUDE BREWING: While holding the brewer handle
up, push down slowly on the K-Cup® pod in the pod holder
until the bottom of the K-Cup® pod is punctured by the exit
needle.

Related product manuals