Before You Brew
Power Button
STRONG
3. Place
2. Pour
STRONG
Fill & Place
Add 1 cup (8oz) of water into a mug. Lift the
water reservoir lid and pour the water into the
reservoir. Do not fill past the MAX or below the
MIN fill lines. Lower the lid and place your mug
on the drip tray.
NOTE: Do not use distilled water.
Plug & Power
Remove packing tape from brewer. Pull plug and
extend cord from cord storage located at the
back of the brewer. Plug into a grounded outlet.
Press the power button. The power button will
illuminate.
1. Fill (8oz)
To Next Page
Loading...
