Keurig K-Mini Plus - Brew Your First Cup; Fill Mug and Reservoir; Insert K-Cup Pod

Brew Your First Cup
STRONG
STRONG
3. Place
2. Pour
Lift & Place Pod
Lift the handle. Place a K-Cup® pod in the
K-Cup® pod holder. Lower the handle completely
to close the lid. The brew indicator light will
flash to indicate that the brewer is ready.
Do not remove the foil lid on the K-Cup® pod.
High Altitude Brewing: While holding the brewer handle up,
push down slowly on the K-Cup® pod in the pod holder until
the bottom of the K-Cup® pod is punctured by the exit needle.
Fill & Place Mug
Add desired amount of water into a mug
(6oz minimum, 12oz maximum). Lift the
water reservoir lid and pour the water into the
reservoir. Do not fill past the MAX or below the
MIN fill lines. Lower the lid and place your mug
on the drip tray.
STRONG
Brew Indicator