Maintenance and Technical Manual Chapter 4
Interceptor Biological Safety Cabinet Class II A2
October 2019
4.11
Monitor Screen Displays
Cabinet Setup Menu
Use to Setup Cabinet
Press Time to set date/time
Press Fan Speed to adjust airflow
Press Sensor Calibration to calibrate airflow sensor
Press UV Settings to adjust UV Timer
Figure 4.20
Calibration Setup Menu
Use to Calibrate Monitor Screen at time of
installation and after filter changes
(only requred if actual airflow velocity does not match
displayed airflow velocity)
Press Calibrate and follow prompts
Note:
To Be Performed by Certified Technician Only
Figure 4.21
To Next Page