Need help?Do you have a question about the Kewtech KT1780 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Continuity | Yes |
| Diode Test | Yes |
| Auto Ranging | Yes |
| Data Hold | Yes |
| Relative Mode | Yes |
| Safety Rating | CAT III 600V |
| AC Current Range | 0 - 10A |
| DC Current Range | 0 - 10A |
| Resistance Range | 0Ω to 40MΩ |
| Capacitance Range | 0 - 100μF |
| Frequency Range | 10Hz to 10MHz |
| Display | LCD |
| Battery | 9V |
Details auto-power-on, self-diagnostic test, and battery status for instrument readiness.
Explains how to perform double-pole voltage tests, indicating voltage and polarity.
Describes performing double-pole voltage tests without relying on batteries.
Details the single-pole phase test procedure and its limitations.
Explains the phase rotation test, its conditions, and how to interpret results.
Covers the continuity test procedure, including expected LED and buzzer indications.
Describes the operation and use of the pen light for illumination.
To Next Page
