Key Automation 900CT-824S User Manual

IT
GB
F
D
E
P
PL
NL
580ISCT-824S rev04
MANUALE ISTRUZIONI
INSTRUCTION MANUAL
MANUEL D'EMPLOI
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUAL DE INSTRUÇÕES
INSTRUKCJA OBSŁUGI
GEBRUIKSHANDLEIDING
Centrale elettronica
Electronic control unit
Centrale électronique
Elektronische Steuereinheit
Central electrónica
Central electrónica
Elektroniczna jednostka sterująca
Electrische zekering
900CT-824S
Key Automation S.p.A

Key Automation 900CT-824S Specifications

General

Brand	Key Automation
Model	900CT-824S
Category	Control Unit
Language	English

Summary

ELECTRICAL CONNECTIONS

MODELS AND CHARACTERISTICS

Technical Data

Technical specifications for the control unit, including power supply and operating temperature.

CONNECTIONS

Power and Motor Connectors

Details CN1 (power) and CN2 (motors, lock, lamp) connections.

Safety and Control Connectors

Explains CN3 (limit switches) and CN4 (safety inputs) connections.

Accessory and Encoder Connectors

Details CN5 (antenna), CN6 (battery/accessory), CN7 (encoder), and JP1 (receiver) connections.

VISUAL DIAGNOSIS

LED Indicators and Display Messages

Explains LED indicators and display messages for visual diagnosis of connections.

Operational Status and Diagnostic Checks

Describes operational status indicators and diagnostic checks for automation.

PROGRAMMING

FUNCTIONS \ VALUES

Clutch, Speed, and Closure Parameters

Parameters for electronic clutch sensitivity, motor speed, and automatic closure timing.

Limit Switch and Safety Function Parameters

Parameters for limit switch configuration, pre-flash, soft start/stop, and safety functions.

Motor Types and Manoeuvre Counter

Parameters for selecting motor types and setting the manoeuvre counter for service signalling.

BATTERY KIT

FINAL WARNINGS

Installation and Safety Warnings

Crucial safety and installation warnings for qualified personnel.

DISPOSAL