Key Automation 900CT-724S User Manual

Centrale 24Vdc per un motore scorrevole, basculante o barriera 24 Vdc, con gestione encoder
24Vdc control unit for one sliding or overhead door motor or barrier, with encoder
Centrale 24Vcc pour moteur coulissant, basculant ou barrière 24 Vcc, avec gestion encodeur
24Vdc Steuergerät für einen Schiebe-oder Schwenktormotor oder 24 Vdc-Schranken mit Encoder-Regelung
Central 24Vcc para un motor corredizo, basculante o barrera 24 Vcc, con gestión codificador
Central 24Vdc para um motor deslizável, basculante ou barreira 24 Vdc, com gestão codificador
Centrala 24Vdc dla bram przesuwnych, wahadłowych lub szlabanów 24 Vdc, o sterowaniu
enkoderowym
CT-724
Istruzioni ed avvertenze per l’installazione e l’uso
Instructions and warnings for installation and use
Instrucciones y advertencias para su instalación y uso
Anleitungen und Hinweise zu Installation und Einsatz
Instruções e advertências para a instalação e utilização
Instructions et avertissements pour l’installation et l’usage
Management
System
ISO 9001:2008
www.tuv.com
ID 9105043769

Key Automation 900CT-724S Specifications

General

Brand	Key Automation
Model	900CT-724S
Category	Control Unit
Language	English

Summary

Safety Warnings

Pre-Installation Checks and Assessments

Essential checks and risk assessments to be performed before installation.

Installation and Usage Safety Precautions

Key precautions for safe installation and operation of the automation system.

Product Overview

Description of the Product

Overview of the CT-724S control unit's features and capabilities.

Description of Connections

Details on the various terminal blocks and their connection purposes.

Models and Technical Characteristics

Information on available models and their key technical specifications.

List of Cables Needed

Required electric cables for connecting various devices to the control unit.

Preliminary Checks

Product Installation

Electrical Connections

Detailed guide for wiring the motor, power supply, and accessories.

Normal Mode Display

Explanation of status messages shown on the 3-digit LCD display.

Malfunctions

Self-learning of the Travel

Procedure for the control unit to automatically learn gate parameters.

Customizing Installation - BASIC MENU

Testing and Commissioning the Automation

Testing

Procedures for testing all system components for correct operation.

Commissioning

Steps for final system setup, documentation, and user handover.

Advanced Menu

Instructions and Warnings for the End User