48
DICHIARAZIONE DI INCORPORAZIONE DI QUASI-MACCHINA
DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
Key Automation S.r.l. a socio unico
Via A. Volta, 30 Capitale sociale 100.000,00 i.v.
30020 Noventa di Piave (VE) Reg. Imprese di Venezia 03627650264
P.IVA 03627650264 C.F. 03627650264 REA VE 326953
info@keyautomation.it
www.keyautomation.it
Il sottoscritto Nicola Michelin, Amministratore Delegato dell’azienda
TheundersignedNicolaMichelin,GeneralManagerofthecompany
Key Automation srl, Via Alessandro Volta, 30 - 30020 Noventa di Piave (VE) – ITALIA
dichiara che il prodotto tipo:
declaresthattheproducttype:
SUN
Motoriduttore elettromeccanico irreversibile per cancelli scorrevoli da 400Kg a 1200Kg
Electromechanicalirreversiblegearmotorforslidinggatesfrom400Kgto1200Kg
Models:
Models:
900SUN4224, 900SUN7224, 900SUN4024, 900SUN7024, 900SUN7024M, 900SUN11024, 900SUN11024M
900SUN52, 900SUN82, 900SUN122
E’ conforme a quanto previsto dalle seguenti direttive comunitarie:
Isinconformitywiththefollowingcommunity(EC)regulations:
Direttiva macchine /
Machinery Directive
2006/42/EC
Direttiva bassa tensione /
Low voltage Directive
2006/95/EC
Direttiva compatibilità elettromagnetica /
EMC Directive
2004/108/EC
Direttiva R&TTE /
R&TTE Directive
1999/5/EC
Secondo quanto previsto dalle seguenti norme armonizzate:
Inaccordancewiththefollowingharmonizedstandardsregulations:
EN 55014-1 + EN 55014-2
EN 61000-3-2 + EN 61000-3-3
EN 61000-6-1 + EN 61000-6-2 + EN 61000-6-3 + EN 61000-6-4
EN 60335-1:2002 + A11:2004 + A1:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 + A15:2011
EN 55022
EN 301489-1:2011; EN 301489-3:2002
EN 300220-1:2012; EN 300220-2:2012
Dichiara che la documentazione tecnica pertinente al prodotto è stata redatta conformemente a quanto previsto dalla
direttiva 2006/42/CE Allegato VII parte B e verrà fornita a fronte di una richiesta adeguatamente m otivata dalle
autorità nazionali.
Declares that the technical documentation is compiled in accordance with the directive 2006/42/EC Annex VII part B
and will be transmitted in response to a reasoned request by the national authorities.
Dichiara altresì che non è c onsentita la messa in servizio del prodotto finchè la macchina, in cui il prodotto è
incorporato, non sia stata dichiarata conforme alla direttiva 2006/42/CE.
He also declares that is no t allowed to use the above mentioned product until the machine, in which this product is
incorporated, has been identified and declared in conformity with the regulation 2006/42/EC.
Noventa di Piave (VE), 14/07/14
Amministratore Delegato
GeneralManager
Nicola Michelin
8 - DICHIARAZIONE DI CONFORMITÁ