Need help?Do you have a question about the Key Automation CT1RD and is the answer not in the manual?
General| Model | CT1RD |
|---|---|
| Frequency | 433.92 MHz |
| Number of Channels | 1 |
| Operating Temperature | -20°C |
| Operating Voltage | 12V DC |
Crucial checks to perform before installing the automation system to ensure readiness and safety.
Essential safety guidelines covering electrical connections, component placement, and user safety during operation.
Overview of the control unit's purpose, design, and primary functions for automation systems.
Identification and explanation of the various terminals and connectors on the control unit for wiring.
Details on available product models and key technical parameters like power supply, load, and operating temperature.
Specifications for necessary electrical cables, including type, cross-section, and maximum allowable length for connections.
Verifying the gate or door's mechanical condition, balance, and suitability for automation to prevent malfunctions.
Ensuring the electrical supply line is properly earthed and protected, and all installation materials meet standards.
Detailed instructions and diagrams for making the correct electrical connections to the control unit.
Steps for physically installing the control unit, including LED status indicators and button functions.
Instructions for learning and cancelling remote control transmitters for system operation.
Procedure to program the duration the automation system operates for opening or closing.
Configuring the time delay for the automatic re-closing of the gate or door after opening.
Activating and configuring the partial opening feature for pedestrian access.
Guidelines for testing all system components and ensuring correct operation according to standards.
Steps for final system setup, documentation, labeling, and user training after successful testing.
Explanation of how jumpers on the control panel customize system functions like operating modes and transmitter types.
Details on activating and using the shared access mode for multiple users.
Configuring the control unit to use either limit switches or external buttons for gate movement control.
Guidance for end-users on safe operation, preventing misuse, and understanding residual risks.
Recommendations for periodic maintenance, cleaning procedures, and battery replacement for remote controls.
To Next Page