KEYA TRONIC PRO User Manual

TRONIC PRO

KEYA TRONIC PRO Specifications

General

Brand	KEYA
Model	TRONIC PRO
Category	Locks
Language	English

Summary

Mode Operations

Multiuser Mode

Open/close with 4-digit code. Code resets after each use for new availability.

Single User Mode

Open/close with 4-digit code for one user. Latch auto-closes after 2 seconds.

Code Management and Master Functions

Change User Code

Procedure to change user code: press Enter (3s), enter current code, then new code.

Master Code: Inspection and Delete

Use master code for inspection (open, no delete) or delete user code (open, code erased).

Master Code and Electronic Key

Change Master Code

Procedure to change master code: press Enter (3s), enter current code, then new code.

Electronic Key: Inspection and Delete

Use electronic key for inspection (open, no delete) or delete user code (open, code erased).

Programmable Settings

Automatic Opening and Signal Settings

Configure auto-open times, acoustic volume (High/Low/Off), and LED status.

Codes, Events, and Battery Level

Set user/master codes; view events, battery level, and operation counts.

Settings Key Configuration

Transfer Settings via Key

Load PC settings to key, then connect key to lock for automatic transfer.

Maintenance and Technical Specifications

Battery Replacement

Replace batteries within 5 mins. Keep BATPACK connected to retain programmed time.

Device Measurements

Diagram displaying physical dimensions of the TRONIC PRO lock unit.

Technical Specifications

Data on salt spray, temp, latch force, UV, vibration, life test, ESD, battery life.