KEYA TRONIC PRO - Master Code and Electronic Key; Change Master Code; Electronic Key: Inspection and Delete

5
Change the Master code
NEW master code
CURRENT master code
press during 3 seconds
Press Enter during 3 seconds.
Introduce Current master code and press Enter.
Introduce New master code and press Enter.
Open using electronic Master key: Inspection mode/ Delete User code
INSPECTION MODE DELETE USER CODE
Connect the Master key (BLUE) Connect the Master key (BLUE)
Lock opens Lock opens
Remove electronic key Remove electronic key
Press enter before 30 seconds After 30 seconds the User code will be
User code is not deleted. deleted.
A new User code will be required to close
the lock again.
6
TRONIC PRO
www.keya.cat 5