KEYA TRONIC PRO - Code Management and Master Functions; Change User Code; Master Code: Inspection and Delete

INSPECTION MODE
Introduce the 5 digit Master code and press Enter
Close the lock by pressing Enter before 30s.
The User code is not deleted.
Change the User code
3
Press Enter during 3 seconds.
Introduce Current code and press Enter.
Introduce New code and press Enter.
CURRENT code NEW code
press during 3 seconds
Open using Master code: Inspection mode / Delete User code
4
MASTER code
To open:
-30s
INSPECTION
MODE
+30s
USER
ERASED
TRONIC PRO
4
www.keya.cat
DELETE USER CODE
Introduce Master code and press Enter.
After 30s the lock remains opened.
The user code has been deleted and a new
User code will be required to close the lock
again.