3 Modes of connection
Wired Mode:
1.Whenthe mode switch isin "OFF"position,the mousewon't respondif the cableis not connected
2. Connectthe cableto theTYPECport of the mouseandthe USBport on the device.The mouseisreadyto usewhilethe
backlitlights up.
• Whenconnectedbycable,the modewill default to wired modeevenif the toggle is in Bluetoothmode or 2.4GHzmode.
2.4GHz Mode:
1.Switchto "G" mode(2.4GHzmode),and the mousewill automaticallyturn on 2.4GHzparing.The RGBlighton the sideOf
the mouse wheel will slowly flash green.
2. Find the 2.4GHz receiver and connect it to the device's USB/Type C port. Oncesuccessfully connected, the RGBlight on the
side of the mouse wheel will turn green and stay on for 3 seconds, then dims off. The RGBbacklit will be resumed to its previous
lighteffectswhen successfullyconnected.
-2
To Next Page
Loading...
