Bluetooth mode
1. Switch to "B" Mode (Bluetooth), and the mouse will automatically turn on Bluetooth pairing mode. The RGBlight on the side of
the mouse wheel will slowly flash blue.
2. Openthe Bluetoothsettings,searchfor a devicenamed "KeychronMI then click "connect"to complete paring.
3. Whenin Bluetooth pairingmode,the RGBlight on thesideof thewheel will slowly blink in bluefor 3 minutes. If it's not connected
within 3 minutes, the RGB light on the side of the mouse wheel will turn off Ifyou need to reconnect, you need to hold the "Left
button + Leftforward button" for 4 secondsto re enter pairingmode.Themode indicatorwill slowlyblink blue.
4. Ifthe MI is in Bluetooth mode and needs to pair with a new device, hold both the "l_eft button * Left forward button" for 4 seconds
and wait for the blue light to flash on. At this point, Bluetooth has re-entered pairing mode, and you can connect the new device to
the MI.
G/OFF/B
B = Bluetooth
" KeychronMI"
disconnected
connected
tum on
simultaneously hold for 4 seconds
(tore enter pairingmode)
To Next Page
Loading...
