Bluetooth mode
1. Switch to "B" Mode (Bluetooth), and the mouse will automatically turn on Bluetooth pairing mode. The mouse indicator will
slowly flash blue.
2. OpentheBluetoothsettings,searchfor a devicenamed"KeychronM6",then click "connect"to completeparing.
3. When in Bluetooth pairing mode, the mouse indicator will slowly blink in blue for 3 minutes. If it's not connected within
3 minutes,the mouseindicatorwill turn off. Ifyou needto reconnect,you needto hold the "Left button + Forwardbutton"
for4 secondsto re-enterpairing mode.Theindicator will slowlyblink blue.
4. Ifthe M6 is in Bluetooth mode and needs to pair with a new device, hold both the "Left button + Forward button" for 4
secondsand wait for the bluelight to flash on. Atthis point, Bluetoothhasre-enteredpairingmode, andyou canconnectthe
new device to the M6.
5. The Bluetooth mode has three channels, the mouse can be seamlessly switched between three devices.
"Keychron M6'
disconnected
Bluetooth tum an
ror,rerær:
B = Bluetooth
o
simultaneously hold for 4 seconds
(tore enterpairingmode)
Buletooth channal shift
To Next Page
Loading...
