Keychron V5 MAX - Advanced Settings and Operations; Reconnecting and Wired Mode; Backlight and Power Management

RECONNECT:
1. Switch the keyboard to the Bluetooth option to activate the keyboard.
2. The Bluetooth indicator flashes for 3 seconds and automatically pairs with the last paired device.
3. If the Bluetooth indicator is off, press any button to enter the connection again.
* The keyboard must have been paired with the device to perform this function.
WIRED MODE
1. Switch the toggle switch to the Cable option (it only works when a USB cable is plugged in).
2. Connect our cable with your PC and keyboard.
3. Backlighting will be turned on.
*Under Wired Mode, keyboard will not enter into Battery Saver Mode.
TURN OFF THE KEYBOARD
Switch the keyboard to the Cable option and unplug the power cable.
BACKLIGHT SETTING
• Short press key combination "Fn" + "Tab" to turn the backlight on/off.
• Short press key combination "Fn" + "Q" / "Fn" + "A" to switch between different types of lighting effects.
20