2.4GHZ / CABLE / BLUETOOTH MODE (MODE TOGGLE SWITCH)
2.4GHZ MODE
1. Connect the 2.4GHz receiver to your device's USB / Type-C Port.
2. Switch the toggle switch to the 2.4GHz option. The keyboard will automatically connect to your device.
* Press the key combination "Fn" + "4" to enter the forced pairing mode. During this period,
it is recommended that the keyboard be within 20cm of the receiver.
BLUETOOTH MODE
1. Switch the toggle switch to the Bluetooth option.
2. Backlighting will be turned on.
3. Hold "Fn+l" key for 4 seconds to activate Bluetooth pairing (the Bluetooth indicator fast
flashes for 3 minutes to detect pairing).
4. Search for the Bluetooth device "Keychron V5 Max" on your device and connect it (the Bluetooth
indicator goes off after successful pairing).
Note: Thiskeyboard supports pairing up to 3 devicessimultaneously via key combination "Fn" + "1" /
*The Bluetooth indicator will continue to flash for 3 minutes.
**Slow or failed connections may exist due to different Bluetooth versions, please make sure all the
settings are correct.
SWITCH BLUETOOTH DEVICES
Short press key combination "Fn" + "1" / "Fn" + "2" / "Fn" + "3" to switch to other device.
19
To Next Page
Loading...
