Getting Started 3
Series E4360 User’s Guide 51
Using the Web Server
Your SAS has a built-in Web server that lets you control it directly from
an internet browser on your computer. With the Web server, you can
access the front panel control functions including the LAN configuration
parameters. Up to
two simultaneous connections are allowed. With
additional connections, performance will be reduced.
NOTE
The built-in Web server only operates over the LAN interface. It requires
Internet Explorer 5+ or Netscape 6.2+. or Firefox2+. You also need the
Java (Sun) plug-in. This is included in the Java Runtime Environment.
Refer to Sun Microsystem’s website. If you are using Internet Explorer 7,
the tab functionality does not work with multiple connections. Open a
separate browser window for each connection.
The Web server is enabled when shipped. To launch the Web server:
1 Open the internet browser on your computer.
2 Enter the instrument’s hostname or IP address into the browser’s
Address field to launch the Web server. The following home page
will appear:
To Next Page
Loading...
Need help?
General
