Keysight Technologies E4417A Configuration Guide

Introduction
This configuration guide describes the standard configurations, options, and compatible accessories of
EPM Series and EPM-P Series power meters. For full specifications, see EPM Series Power Meters E-Series
and 8480 Series Power Sensors - Data Sheet (Keysight literature number 5965-6382E) or E4416A/E4417A
EPM-P Series Power Meters and E-Series E9320 Peak and Average Power Sensors – Data Sheet (Keysight
literature number 5980 - 1469E ) . Contact your local Keysight Technologies, Inc. representative at the offices
listed on the back of this guide if you need more information.
EPM Series power meters
– N1913A power meter (single channel)
– N1914A power meter (dual channel)
EPM-P Series power meters
– E4416A power meter (single channel)
– E4417A power meter (dual channel)
E-Series power sensors
– E441xA CW power sensors (10 MHz to 26.5 GHz, sensor dependent)
– E9300 average power sensors (9 kHz to 18 GHz, sensor dependent)
– E9320 peak and average power sensors (50 MHz to 18 GHz, sensor dependent)

Keysight Technologies E4417A Specifications

General

Brand	Keysight Technologies
Model	E4417A
Category	Measuring Instruments
Language	English