06 | Keysight | EPM and EPM-P Series Power Meters E-Series Power Sensors - Configuration Guide
Hardware Options
The following options are available on the EPM and EPM-P Series power meters. All order
combinations have to be configured upon ordering; these options are not available for field
upgrade.
EPM Series power meter
Option Description
N 19 13 / 4A-004 Delete power sensor cable(s)
N1913 / 4A-101
1
Single/dual-channel average power meter
N1913/ 4A-201 Single/dual-channel average power meter with VGA, trigger in/out, one front and one
rear USB ports
N 19 13 / 4A- B0 1 Without battery (Mandatory for option 201)
N 19 13 / 4A- C0 1 Front calibrator, front sensor (Need to order option 201)
N 19 13 / 4A- C0 2 Front calibrator, parallel front and rear sensor (Need to order option 201)
N 19 13 / 4A- C0 3 Rear calibrator, parallel front and rear sensor (Need to order option 201)
N1913A-200 436A and 437B code compatibility via GPIB interface only. 436A and 437B language
modes are not compatible with LAN or USBTM remote interface. For new N1913A
purchase.
N1914A-200 438A code compatibility via GPIB interface only. 438A language mode is not
compatible with LAN or USBTM remote interface. For new N1914A purchase.
N 19 13 / 4A- 908 Rack mount kit (one instrument). Can be ordered as standalone.
N 19 13 / 4A- 909 Rack mount kit (two instruments). Can be ordered as standalone.
BV0007B BenchVue Power Meter/Sensor Control and Analysis app license
N6901A-1FP 436A and 437B code compatibility for N1913A. Post purchase upgrade only.
N6902A-1FP 438A code compatibility for N1914A. Post purchase upgrade only.
1. Option 101 provides the front calibrator and the front sensor(s), and it can’t be ordered with any of the
options B0x/C0x.
EPM-P Series power meter
Option Description
E441xA /B-002 Parallel rear panel sensor input connector(s) and front panel reference calibrator
connector
E441xA /B-003 Parallel rear panel sensor input connector(s) and rear panel reference calibrator
connector
E441xA /B-004 Delete power sensor cable(s)
E441xA /B-908 Rack mount kit (one instrument). Can be ordered as stand-alone.
E441xA /B-909 Rack mount kit (two instruments). Can be ordered as stand-alone.
To Next Page
Loading...
Need help?
General
