Keysight Technologies EXA N9010B

Option EXM, External Mixing Upgrade Kit
Keysight N9010B EXA
Signal Analyzer
Installation Note

Keysight Technologies EXA N9010B Specifications

General

Resolution Bandwidth	1 Hz to 10 MHz
Input Impedance	50 Ω
Connectors	N-type female
Maximum Input Power	+30 dBm
Phase Noise	-95 dBc/Hz at 10 kHz offset (1 GHz carrier)
Display	10.4-inch touchscreen
Analysis Bandwidth	Up to 160 MHz
Input VSWR	1.5:1 typical

Summary

Introduction

Installation Kit Parts List

Tools Required

Initial Instrument Functionality Check

Installation Procedure

Analyzer Disassembly

Standard Instrument Disassembly

Procedure for disassembling a standard EXA signal analyzer.

Option PRC Disassembly

Procedure for disassembling an EXA signal analyzer with Option PRC.

Top Brace Removal

Front Frame Assembly Removal

Add Cables to A13 Front End and A15 Front End Controller

Add EXT MIXER Connector and Cable to Front Frame Assembly

Front Frame Replacement

Top Brace Replacement

Update Instrument Software

Licensing the New Option

Verify the License Installation

Verify Optional Functionality

Utilities, Adjustments, and Performance Verification Tests